
D&M Professional
1100 Maplewood Drive Itasca, Illinois 60143
Tel: 630.741.0330 Fax: 630.741.0652
www.d-mpro.com
PLEASE NOTE: Specifications are based on measurement conditions and proper care for the
machine, and are subject to change without notice.
AVR-989P
Specifications
Power Amplifier Section
Rated output: *THD figures are power amp stage values
Front L/R: 115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
Center: 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W
(6 ohms, 1kHz, THD 0.7%)
Surround L/R: 115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
Surround Back L/R: 115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
Preamplifier Section
Input Sensitivity / Impedance: 200mV / 47 kohms
Frequency Response: 10Hz ~ 100kHz – +1, -3dB
(DIRECT mode)
S/N Ratio: 100dB (IHF-A weighted, DIRECT mode)
FM Section
Tuning Frequency Range: 87.5 – 107.9 MHz
Usable Sensitivity: 1.0 µV (11.2 dBf)
AM Section
Tuning Frequency Range: 520 – 1710 kHz
Usable Sensitivity: 18 µV
General
Power Supply: AC 120 V, 60Hz
Power Consumption: 6.0 A (Standby 0.1W)
Dimensions (w/o rack kit)
Width: 434mm (17 3/32”) w/o rack kit
Height: 171mm (6 47/64”)
Depth: 414mm (16 19/64”)
Weight: 12.8Kg (28 lbs, 3.5 oz)
© 2008 D&M Professional. All rights reserved.
Ease-of-use
Audyssey Dynamic Volume, for real-time volume adjustment
Large changes in volume sometimes occur between documentaries where the sound is
mainly narrative and movies which often contain loud sound effects. Viewers often raise
the volume for documentaries to hear the narrative more easily but the turn it down again
when a commercial with loud sound effects comes on. They do this numerous times
during a program of this type. Audyssey Dynamic Volume constantly monitors the sound
sources and adjusts the volume to the optimum level for the particular source being heard
without sacrificing dynamic range.
The AVR-989P is also equipped with Audyssey MultEQ XT which measures the acoustic
characteristics of the room to obtain the optimum acoustic effects, and Dynamic EQ which
reproduces the high and low range with the optimum acoustic effect during low volume
levels. Dynamic Volume combines these two functions to achieve maximum performance.
Audyssey MultEQ XT Auto setup and Room EQ
Tower type microphone for more accurate measuring
Up to eight measurement points
ALFC (Adaptive Low Frequency Correction) filtering for higher resolution processing in the
low frequency range.
2-line fluorescent display on front panel
Current status, such as the input source or audio format, is displayed in two lines. It is also
possible to check the name of the album or music track of the memory audio item or other
items without viewing the TV screen.
The 2-line display also makes it possible to easily change the settings without the OSD
(On-screen Display) on the TV monitor.
Three Quick Select Buttons
Auto setup, Auto Surround, Auto Signal Detection
Auto Surround Back Channels on for auto-detection of supporting sources
Auto Surround Mode
Audio Delay function (max. 6 frames or 200 msec)
Night mode for neighbor friendly listening
Muting level settings (Full / -40dB / -20dB)
Audio Level Memory, capable of correcting different signal levels for each input device
Volume Level Limiter, for setting maximum volume levels
Power-ON Volume Level Memory
Variable subwoofer crossover switching
Inputs/Outputs
IN HDMI 4
Component 3
S-Video 7
Composite 7
Analog Audio (Tuner incl.) 10
Analog Ext. Input 7.1 ch
Digital OPTICAL 3
Digital COAXIAL 3
OUT HDMI Monitor 1
Component Monitor 1
S-Video Monitor 1
REC 2
Composite Monitor 1
REC 2
Analog Audio REC 2
Zone 2 1
Audio PRE out (7.1 ch) 1
Digital OPTICAL 1
Others Dock Control Port 1
Sirius Connector 1
XM Connector 1
FM Tuner Antenna 1
AM Tuner Antenna 1
Remote IN / OUT 1
RS-232c 1
Trigger Output (+12V, 150mA) 2
Komentarze do niniejszej Instrukcji